天堂成人免费av电影一区,a一区二区三区,僵尸再翻生在线观看,麻豆一区区三区四区产品精品蜜桃

深圳市文惠機械設備有限公司

主營:冷水機,工業冰水機, 風冷式凍水機,低溫冷水機,冷水機組,吸料機,干燥機,加料機
您現在的位置: 機械及行業設備 > 通用機械 > 干燥設備 > 深圳市文惠機械設備有限公司 > 供求信息
載入中……
[供應]熱縮套管專用蜂巢PET除濕機,惠州除濕機,除濕機
點擊圖片放大
  • 產品產地:中國深圳
  • 產品品牌:文惠
  • 包裝規格:WHSD-30-T
  • 產品數量:200
  • 計量單位:臺
  • 產品單價:0
  • 更新日期:2018-01-23 10:14:15
  • 有效期至:2028-01-21
  • 收藏此信息
熱縮套管專用蜂巢PET除濕機,惠州除濕機,除濕機 詳細信息

特點
▲ 采用進口優級質蜂巢轉輪,除濕效果好、壽命長、維護成本低
▲ 整機特別注重管路的設計流暢性,采用最合理、最簡潔的管路設計,以最大程度減少系統壓損,減少耗能,提升系統風量
▲ 整機環保節能設計,再生電熱系統采用高性能保溫材料,且轉輪工作區之間隔熱良好,避勉熱能外傳,較之其它除濕機可節能30%以上
▲ 由于采用進口優質新型蜂巢,再生溫度150℃比顆粒分子篩除濕機再生溫度200℃節省再生耗能40%以上
▲ 回風與再生均裝有高精度過濾器,確保蜂巢轉輪不受粉塵污染
▲ 回風采用雙冷卻設計,以保護風機和得到更低的回風溫度來確保干燥風露點溫度
▲ 采用P.l.D溫度控制系統,可精確控制再生溫度
▲ 標準配備預約開機與間歇式運轉功能,可方便實現機器的開、關機控制.且可節省能源
▲ 具有超溫警報,電源相序錯誤,馬達過載等保護功能
▲ 結構緊湊,外形美觀,維修保養方便,故障率低。
▲ Adopt imported high quality honeycomb rotor, which features effective dehumidifying, long life and low maintenance cost.
▲ The machine features optimized design of piping system, applying the most reasonable and simplified layout of the pipes to reduce the pressure loss and energy consumption, and increase air Volume of the system.
▲ Environment-friendly design, regeneration heating system made with high performance insulation materials and rotor working areas are sealed and insulated to avoid heat dissipation,saving energy up to 30% as compared to other traditional dehumidifiers.
▲ By using of the new type of honeycomb,which only requires 150℃ regeneration temperature as compared with 200℃ regeneration tempaerature of molecular sieve honeycomb rotor,energy can be saved up to 40%.
▲ High performance filters for both return and regeneration air to avoid contamination of the rotor by dusts.
▲ Double cooling system for return air can protect the blower and get lower return air temperature to ensure the low dew-point of the dry air.
▲ Adopt P.I.D. temperature control system for accurate control of the temperature
▲ Standard with auto start and intermittent working function, convenient for start/stop of the machine and energy saving.
▲ Featured with overheat alarm, phase sequence error and motor overload alarm
▲ Compact design, easy maintenance and low failure rate.
產品簡介
為何要使用蜂巢除濕機
如果你的塑膠產品存在如左圖所示問題,造成塑膠產品淪為次級品或不良品。那么,其多數原因為成型前塑料未充分除濕干燥所致,尤其吸濕性很強的塑料如PET、PA、PMMA、PBT等,實踐證明降低干燥風的露點到-40℃以下,同時控制熱量使之吹過含濕性塑料顆粒表面,才能使它在成型之前含水率降低到0.02%以下。
Why to use Honeycomb Dehumidifier
If your product has such problems which are regarded as low grade or bad quality as shown on the left, for most of the cases, the reason is that the raw materials are not completely dried before moulding, especially for hygroscopic engineering plastic materials, such as PET,PA,PMMA,PBT,etc As practically proved, only air flow of high temperature and low dew-point down to -40℃ can make the hydrous plastic materials to reach moisture content below 0.02% before moulding

同類型其他產品
免責聲明:所展示的信息由企業自行提供,內容的真實性、和合法性由發布企業負責,浙江民營企業網對此不承擔任何保證責任。
友情提醒:普通會員信息未經我們人工認證,為了保障您的利益,建議優先選擇浙商通會員。

關于我們 | 友情鏈接 | 網站地圖 | 聯系我們 | 最新產品

浙江民營企業網 www.tax-men.com 版權所有 2002-2010

浙ICP備11047537號-1

主站蜘蛛池模板: 青浦区| 凤翔县| 南昌县| 兰西县| 唐河县| 平武县| 丘北县| 布尔津县| 新干县| 临湘市| 灵璧县| 肃宁县| 青神县| 江北区| 蓬莱市| 唐海县| 嘉祥县| 肃北| 纳雍县| 无极县| 皋兰县| 友谊县| 景德镇市| 格尔木市| 宁武县| 临泉县| 东至县| 江陵县| 万山特区| 临沧市| 东乡族自治县| 明溪县| 清新县| 儋州市| 德阳市| 连云港市| 凌源市| 九龙城区| 城市| 惠来县| 龙口市|