K-309MoLT韓國高麗不銹鋼藥芯焊絲             K-308T  E308T0-1/-4  YF308C  YF308C  K-308T is formulated for MAG welding of 18%Cr-8%Ni stainless steels.It is designed for operation primarily in the flat position and for weldling horizontal fillet welds   K-308LT  E308LT1-1/-4  YF308LC  YF308LC  K-308LT is designed for MAG welding of low carbon 18%Cr-8%Ni stainless steels. (AISI 304， 304L， 304LN， ASTM A157 Gr. C9 A320 Gr. B8C or D)   K-309T  E309T0-1/-4  YF309C  YF309C  K-309T is formulated for MAG welding of 22%Cr-12%Ni stainless steels. Typical applications is for welding of dissimilar steels， such as 304 to mild steel or low alloy steels.   K-309LT  E309LT1-1/-4  YF309LC  YF309LC  K-309LT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels. Dissimilar joint welds of and between high-strength， mild steels and low-alloyed QT-steels， stainless， ferritic Cr- and austenitic Cr-Ni-steels， manganese steels. Cladding for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N.   K-309LMT  EC309L  YF309LG  YF309LG  K-309LMT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels.It is suitable for automotive exhaust fabricators such as front pipe， bellows， flange. (AISI 409， 436， cladding and dissimilar joint welds)   K-309MoLT  E309LMoT1-1  YF309MoLC  YF309MoLC  K-309MoLT is designed for MAG welding of low carbon 22%Cr-12%Ni-Mo stainless steels. Dissimilar joint welds of and between high-strength， mild steels and low-alloyed QT-steels， stainless， ferritic Cr- and austenitic Cr-Nisteels， manganese steels. Cladding for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N.   K-312T  E312T1-1  -  -  K-312T is formulated for MAG welding of 30%Cr-9%Ni stainless steels. It is used for joining dissimilar steels， steels with reduced weldability and buffer layers prior to hardfacing (rolls， forging dies， hotwork tools， dies for plastics and so on)   K-316T  E316T0-1/-4  YF316C  YF316C  K-316T is formulated for MAG welding of 18%Cr-12%Ni-2%Mo stainless steels where increased resistance to pitting corrosion is required (AISI 316， 316L)   K-316LT  E316LT1-1/-4  YF316LC  YF316LC  K-316LT is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steels. This wire has low carbon content which gives good resistance to most types of corrosion of the weld metal (AISI 316L， 316Ti， 316Cb)   K-317LT  E317LT1-1  YF317LC  YF317LC  K-317LT is designed for MAG welding of low carbon 19%Cr-13%Ni-3%Mo stainless steels. The principal area of plication is process and chemical plant， shipbuilding as well as clear plant industries.