Hydraulic Function: Directional Control
液壓功能：方向控制
Constructive Form 結構形式: Cetop Valves / Cetop 閥
Piloting Source: Solenoids (one or two)
引導源：螺旋管（一或兩個）
Control Type 控制類型: On-Off， Proportional / 開-關， 比例
Max. working temperature 最高工作溫度: 50℃
Max. Pressure 最大壓力: 300bar
Max. flow delivery 最大流量傳送: 80lit/min.
Electric solenoids supply 電源: 0-30VDC

The machine is equipped with additional oil supply lines， therefore it is possible also to test hydraulic blocks equipped
with proportional valves or other valves.
機器裝配有額外的供油管道，因此也可以測試裝配有比例閥或其他閥的液壓快。
The machine comes with a wide test area that is protected by the mean of a door / 機器配有廣闊的測試區域，用門來進行保護
The door is equipped with lexan windows to allow the operator to see the test while running.
門安裝有聚碳酸酯材質的玻璃窗，可以讓操作者在機器運行時看到測試過程。
Hydraulic adapters are screwed in manually by the operator / 操作者用手動方式旋緊液壓適配器
The machine has a manual lock device to firmly hold the samples under test.
機器在試驗時通過一個手動鎖定裝置來牢牢的抓住樣品。
Test data are saved and stored thanks to the PC， if required data can be printed out.
試驗數據可被保存并儲存到電腦中，如有需要可打印出數據。
Note: Max. Flow delivery cannot be reached at the max. pressure and the opposite (performances have to be within the installed
power 30kw) / 在最大壓力下不能達到最大流量傳送，相對的，必須在裝機功率為 30kw 下才能實現該性能。